Model-specific code library

Viking dishwasher error codes.

We decode the flash pairs from 1-1 to 5-5 and Pan Flood on 451 Series and 324 Series built-in dishwashers, 18 rows in all, with Fill Too Fast Error as 4-2 on the 451 Series and 4-5 on the 324 Series.

Dishwasher code finder

1-1 means the POTS/PANS light flashes once and the NORMAL WASH light flashes once. Viking's chart calls it Pan Flood Sensor Disconnect and prints only a reset: hold START for 4 seconds.

Read the 1-1 checks
Or choose

18 researched dishwasher codes. What a message means shifts from one Viking series to the next, so your own manual settles it.

Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Messages with a manual behind them.

1-1

Flash pairs

1-1 means the POTS/PANS light flashes once and the NORMAL WASH light flashes once. Viking's chart calls it Pan Flood Sensor Disconnect and prints only a reset: hold START for 4 seconds.

Reset, then book
1-2

Flash pairs

1-2 means the POTS/PANS light flashes once and the NORMAL WASH light flashes twice. Viking's chart calls it Motor Control Status Error and prints only a reset.

Reset, then book
1-3

Flash pairs

1-3 means the POTS/PANS light flashes once and the NORMAL WASH light flashes three times. Viking's chart calls it Motor Control Comms Error and prints only a reset.

Reset, then book
1-4

Flash pairs

1-4 means the POTS/PANS light flashes once and the NORMAL WASH light flashes four times. Viking's chart calls it Diverter Timeout and prints only a reset.

Reset, then book
1-5

Flash pairs

1-5 means the POTS/PANS light flashes once and the NORMAL WASH light flashes five times. Viking's chart calls it Drain Error and lists six checks: sink, drain hose, disposal plug, high loop, level and filters.

Reset, then book
2-1

Flash pairs

2-1 means the POTS/PANS light flashes twice and the NORMAL WASH light flashes once. Viking's chart calls it Huba Disconnect Error and prints only a reset.

Reset, then book
2-2

Flash pairs

2-2 means the POTS/PANS light flashes twice and the NORMAL WASH light flashes twice. Viking's chart calls it Fill Timeout and lists four checks: supply on, fill line not kinked, dishwasher level, and water pressure at the sink.

Reset, then book
2-3

Flash pairs

2-3 means the POTS/PANS light flashes twice and the NORMAL WASH light flashes three times. Viking's chart calls it Low Level Sensor Error and lists two checks: dishes holding water, and the drain hose high loop.

Reset, then book
2-4

Flash pairs

2-4 means the POTS/PANS light flashes twice and the NORMAL WASH light flashes four times. Viking's chart calls it High Level Error and lists one check: items in the rack must be held so they cannot turn over.

Reset, then book
3-1

Flash pairs

3-1 means the POTS/PANS light flashes three times and the NORMAL WASH light flashes once. Viking's chart calls it UI-MC Comm Error, a communication error between the user interface and the motor control, and prints only a reset.

Reset, then book
3-3

Flash pairs

3-3 means the POTS/PANS light flashes three times and the NORMAL WASH light flashes three times. Viking's chart calls it Drain Pump Error and prints only a reset.

Reset, then book
3-4

Flash pairs

3-4 means the POTS/PANS light flashes three times and the NORMAL WASH light flashes four times. Viking's chart calls it Motor Status and prints only a reset.

Reset, then book
3-5

Flash pairs

3-5 means the POTS/PANS light flashes three times and the NORMAL WASH light flashes five times. Viking's chart calls it Motor Under Voltage and prints only a reset.

Reset, then book
4-1

Flash pairs

4-1 means the POTS/PANS light flashes four times and the NORMAL WASH light flashes once. Viking's chart calls it Temperature Sensor Error and prints only a reset.

Reset, then book
4-2

Flash pairs

4-2 means the POTS/PANS light flashes four times and the NORMAL WASH light flashes twice. On the 451 Series chart, Viking calls it Fill Too Fast Error: check that the dishwasher is level front to back and side to side, then reset.

Reset, then book
4-5

Flash pairs

4-5 means the POTS/PANS light flashes four times and the NORMAL WASH light flashes five times. On the 324 Series chart, Viking calls it Fill Too Fast Error: check the dishwasher is level front to back and side to side, then reset.

Reset, then book
5-5

Flash pairs

5-5 means the POTS/PANS light flashes five times and the NORMAL WASH light flashes five times. Viking's chart calls it Internal Error and prints only a reset.

Reset, then book
PAN FLOOD

Flash pairs

PAN FLOOD on a Viking built-in dishwasher is shown by both lights, POTS/PANS and NORMAL WASH, flashing continuously. Viking prints only a reset: hold START for 4 seconds. If water reaches the floor, shut the supply valve and book a technician.

Reset, then book

The current 3, 5 and 7 Series dishwasher chart could not be downloaded, so those models are not covered. Eleven pairs and Pan Flood print only a reset, and F2 is printed nowhere.

Start with the model boundary.

Dishwashers in a thoughtfully designed home

Viking dishwashers flash pairs, not F-numbers.

We decode the flash pairs from 1-1 to 5-5 and Pan Flood on 451 Series and 324 Series built-in dishwashers, 18 rows in all, with Fill Too Fast Error as 4-2 on the 451 Series and 4-5 on the 324 Series.

The current 3, 5 and 7 Series dishwasher chart could not be downloaded, so those models are not covered. Eleven pairs and Pan Flood print only a reset, and F2 is printed nowhere.

Choose the next safe action.

Read the whole display

Count the POTS/PANS flashes first and the NORMAL WASH flashes second, and say which series the dishwasher is.

Respect the service boundary

Water near the dishwasher means: shut its supply valve and turn its breaker off before touching the area.

Documents checked for this library.

  • Viking Use & Care Manual / 451 Series Built-In Dishwashers
  • Use & Care / 324 Series Built-In Dishwashers

Rely on the guide for your precise series, and read how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Are these dishwasher meanings universal?

The current 3, 5 and 7 Series dishwasher chart could not be downloaded, so those models are not covered. Eleven pairs and Pan Flood print only a reset, and F2 is printed nowhere.

What do I include when I report a dishwasher code?

Snap the whole dishwasher display and the data plate. Note what the appliance was doing the moment the message came up, and do not borrow an explanation meant for some other product.

Why does a dishwasher message show up with no explanation?

A phrase people once searched for is no substitute for the maker's own wording. When our dishwasher documents leave a message undecoded, it stays listed by name and we point you to help without naming any part or cause.

How can I tell which dishwasher series a document covers?

Open a manufacturer document from this dishwasher library and match the model on its cover to the plate on your appliance. A different series comes with its own guide.

Let’s take care of it.

The burner will not light.
Let us take a look.