Read the whole display
Give the model, the Er number or the light that shows, and whether water is reaching the machine.
Model-specific code library
We decode Er01, Er03, Er15, Er16 and Er25 on the FNIU515D nugget machine, the Check Water and Time to Clean lights on 5 Series 15 in machines, and CL on the FIUI5152D.
A fully blank display on a Viking FIUI5152D drain-pump ice machine can mean the drain safety has cut power because the water level hit its high limit. Fix the restriction in the drain line and power returns by itself.
Read the Blank display (no icons) checks14 researched ice maker codes. What a message means shifts from one Viking series to the next, so your own manual settles it.
A fully blank display on a Viking FIUI5152D drain-pump ice machine can mean the drain safety has cut power because the water level hit its high limit. Fix the restriction in the drain line and power returns by itself.
Check, then bookA flashing blue Check Water light on a Viking 5 Series 15 in ice machine means check the water supply. The control checks for water every 20 minutes and restarts ice making by itself once water returns.
Check supplyCL alternating with ICE on a Viking FIUI5152D undercounter ice machine appears every 3000 cycles to say the unit needs cleaning. The reminder resets once the machine has finished its cleaning cycle.
Routine upkeepEr01 on a Viking FNIU515D nugget ice machine means the evaporator is still 32 F or warmer after 30 minutes of ice making. The chart lists a refrigerant leak check, a sensor check, and restoring power once the cooling problem is solved.
Book a visitEr03 on a Viking FNIU515D nugget ice machine is an evaporator temperature error: 32 F or more after 10 minutes of ice making. The chart lists the same actions as for Er01.
Book a visitEr15 on a Viking FNIU515D nugget ice machine is a water supply error: the water level sensor found no water for 2 minutes. The chart lists a water supply pressure check and a water level sensor check, then restart.
Book a visitEr16 on a Viking FNIU515D nugget ice machine is a water drain error: the lower limit water level sensor did not detect water within 2 minutes of the drain valve operating. The chart lists replacing the sensor and checking the drain valve.
Book a visitEr25 on a Viking FNIU515D nugget ice machine is an evaporator freezing error: the outlet temperature dropped below its set point for 2 minutes while ice was being made. The chart says it occurs when the ambient temperature is low and that the machine should run above 50 F.
Book a visitWhen the ICE and DRAIN lamps blink together on a Viking FNIU515D, the sensor reading air ahead of the condenser is open or shorted. That is the chart’s reading. Nothing in the guide suggests a home fix, so book a visit.
Book a visitA Viking FNIU515D that blinks ICE and NO WATER in step is pointing at the evaporator outlet sensor, which the chart calls disconnected or shorted. Its action: check the sensor and how it is attached, then restart after the repair.
Book a visitA slow ICE lamp, on for 2 seconds and off for 1, means the storage bin on a Viking FNIU515D nugget machine has filled up. Nothing is wrong. The lamp goes out once the sensor sees the release temperature, and ice making resumes.
NormalAll three lamps flickering twice, one after another, tell a Viking FNIU515D owner that six months of ice making have passed. Run the cleaning cycle with Viking Ice Machine Cleaner and the flicker stops.
Clean soonNO WATER and DRAIN blinking together on a Viking FNIU515D mean its ice full sensor, down in the storage bin, has lost its connection or shorted out. It is a sensor error, not a water or drain problem. Book a visit.
Book a visitThe Time to Clean light on a Viking 5 Series 15 in ice machine comes on after 6 months of use. Clean the ice making system. It is a reminder, not a breakdown.
Routine upkeep
We decode Er01, Er03, Er15, Er16 and Er25 on the FNIU515D nugget machine, the Check Water and Time to Clean lights on 5 Series 15 in machines, and CL on the FIUI5152D.
The lamp patterns beside each Er code on the FNIU515D were lost in the text we read, so we do not list them. Other Er numbers are not printed in the documents we read.
Give the model, the Er number or the light that shows, and whether water is reaching the machine.
Shut the water supply to the machine if you find water on the floor. Leave refrigerant and sensor checks to a technician.
On a Viking undercounter ice machine, little or no ice usually traces to the control position, the water supply, a blocked drain, a dirty condenser or scale on the evaporator. Check the switch and the water first, then clean the system. Book a technician if the bin stays empty.
Gray, smelly or off-tasting ice from a Viking ice machine usually means mineral scale on the evaporator, hard water, food stored in the bin or an old charcoal filter. Clean the machine, empty the bin of anything but ice and consider a filter. Call us if the taste stays after cleaning.
Rely on the guide for your precise series, and read how we research these pages.
The lamp patterns beside each Er code on the FNIU515D were lost in the text we read, so we do not list them. Other Er numbers are not printed in the documents we read.
Snap the whole ice-maker display and the data plate. Note what the appliance was doing the moment the message came up, and do not borrow an explanation meant for some other product.
A phrase people once searched for is no substitute for the maker's own wording. When our ice-maker documents leave a message undecoded, it stays listed by name and we point you to help without naming any part or cause.
Open a manufacturer document from this ice-maker library and match the model on its cover to the plate on your appliance. A different series comes with its own guide.