Viking ice maker Blank display (no icons) / Drain and pump

Viking ice-maker
error Blank display (no icons)

Ice-maker / display referenceBlank display (no icons)

A fully blank display on a Viking FIUI5152D drain-pump ice machine can mean the drain safety has cut power because the water level hit its high limit. Fix the restriction in the drain line and power returns by itself.

Also shown as Blank display (no icons)

Last reviewed

Ice-maker / display referenceBlank display (no icons)
Meaning
A fully blank display on a Viking FIUI5152D drain-pump ice machine can mean the drain safety has cut power because the water level hit its high limit. Fix the restriction in the drain line and power returns by itself.
Who handles it
Check, then book
Related codes
Source
Install / Use & Care MANUAL / Professional Undercounter Ice Machine / FIUI5152D

What Viking ice maker Blank display (no icons) means.

What it means

A fully blank display on a Viking FIUI5152D drain-pump ice machine can mean the drain safety has cut power because the water level hit its high limit. Fix the restriction in the drain line and power returns by itself.

What you can safely check

Confirm the cord is seated and the circuit is live.

When to call a technician

The display stays blank with the outlet live.

Your Viking checklist, kept on this device only

Safe checks, in order.

0 of 4 checks done
  1. Viking ice maker Blank display (no icons): Ice makers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Rule out the outlet

    Confirm the cord is seated and the circuit is live. A dead outlet looks identical to a drain cut-out.

  2. Heavy metal control knobs on a professional-style range
    Illustration. Follow your model’s instructions.
    Check 2

    Give the pump a few minutes

    The manual says the pump keeps running during the cut-out. Wait a short while for the display to return with a start-up chime.

  3. A technician holds a tablet showing a blank checklist beside a stainless gas range with a skillet on a lit burner.
    Illustration. Follow your model’s instructions.
    Check 3

    Look at the drain line

    Look for kinks, a long unneeded loop, or a drain that does not end in an open air gap. Check that the vent tube on the back of the unit is open.

  4. A technician testing a range burner with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Re-test the drain

    With the unit off, slowly pour three quarts of water into the bin. It should drain fully with no power cut. If the display blanks again, book a visit.

Still showing Blank display (no icons)?

Pass along the model and the checks you ran, then open a visit request from this spot.

Book a visit

Ice maker cycle.

Conceptual Ice maker sectionWater inletEvaporator plateIce bin and bin sensorDrain pumpControl12345
  1. 1Water inlet
  2. 2Evaporator plate
  3. 3Ice bin and bin sensor
  4. 5Control

A simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Parts behind the message.

The rear panel of an undercounter ice machine shows a clear drain hose clipped to the back and a gray pump housing.

Component reference

Drain pump and drain lamp

A Viking 5 Series nugget ice machine (FNIU515D) removes melt water with a drain pump that has its own reservoir.

Read the definition

A little more context.

Why would the whole display go dark?

On drain-pump models, a high-limit condition interrupts power to prevent flooding. With no power, no icons show in the display area.

Read the supporting manual

What clears the high-limit condition?

Fixing what restricts the drain: no kinks, an open drain with an air gap, and an open vent tube on the back of the unit.

Read the supporting manual

Does the machine ever pause without going dark?

It can. The troubleshooting page says the pump may briefly shut the unit off when a lot of water arrives. Wait a few minutes while the pump works.

Read the supporting manual

The manual behind the message.

Manufacturer document

Install / Use & Care MANUAL / Professional Undercounter Ice Machine / FIUI5152D

Viking Range, LLC (official manual PDF)

printed code (091426) / PDF p.10

Manufacturer document

Install / Use & Care MANUAL / Professional Undercounter Ice Machine / FIUI5152D

Viking Range, LLC (official manual PDF)

printed code (091426) / PDF p.25

FIUI5152D guide: the drain test on page 10 and the troubleshooting list on page 25. Applies to drain-pump versions only.

Here to help

Good questions.
Clear answers.

Talk to our team
Does a blank display point to a dead control?

Not by itself. The guide names the drain safety cut-out as one cause, and the display returns with a chime as the water level drops.

Does every ice machine have this safety?

Only drain-pump models. Gravity-drain machines have no pump and no high-limit cut-out.

Is the vent tube important?

Yes. The guide wants the pump vent tube kept open so air moves as water enters the reservoir. A pinched tube slows draining.

What helps me narrow it down on the phone?

Whether a chime sounded when the display returned, and how the drain line runs from the machine. Those two details point at the cause.

Let’s take care of it.

The burner will not light.
Let us take a look.