Viking ice maker Er01 / Evaporator temperature

Viking ice-maker
error Er01

Ice-maker / display reference

Er01 on a Viking FNIU515D nugget ice machine means the evaporator is still 32 F or warmer after 30 minutes of ice making. The chart lists a refrigerant leak check, a sensor check, and restoring power once the cooling problem is solved.

Also shown as Er01

Last reviewed

Ice-maker / display reference
Meaning
Er01 on a Viking FNIU515D nugget ice machine means the evaporator is still 32 F or warmer after 30 minutes of ice making. The chart lists a refrigerant leak check, a sensor check, and restoring power once the cooling problem is solved.
Who handles it
Book a visit
Related codes
Source
Install / Use & Care MANUAL / Undercounter Nugget Ice Machine / FNIU515D

What Viking ice maker Er01 means.

What it means

Er01 on a Viking FNIU515D nugget ice machine means the evaporator is still 32 F or warmer after 30 minutes of ice making. The chart lists a refrigerant leak check, a sensor check, and restoring power once the cooling problem is solved.

What you can safely check

Er01, with the 30-minute condition.

When to call a technician

Er01 returns after the checks.

Your Viking checklist, kept on this device only

Safe checks, in order.

0 of 4 checks done
  1. Viking ice maker Er01: Ice makers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Note the code

    Er01, with the 30-minute condition.

  2. Heavy metal control knobs on a professional-style range
    Illustration. Follow your model’s instructions.
    Check 2

    Switch the machine off

    Stop ice making.

  3. A technician holds a tablet showing a blank checklist beside a stainless gas range with a skillet on a lit burner.
    Illustration. Follow your model’s instructions.
    Check 3

    Do not open the sealed system

    Refrigerant checks are for a technician.

  4. A technician testing a range burner with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Book a visit

    The chart actions are service steps.

Still showing Er01?

Pass along the model and the checks you ran, then open a visit request from this spot.

Book a visit

The water line.

Conceptual Refrigerator sectionWater inlet valveWater filterIce makerDoor dispenser1234
  1. 3Ice maker
  2. 4Door dispenser

A simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

A little more context.

What does Er01 report?

The evaporator temperature stayed at 32 F or more after 30 minutes of ice making. The chart's actions are to check for refrigerant leakage, check the sensor and its attachment, and resupply power once the cooling problem is solved.

Read the supporting manual

What do the lamps show?

On the control panel the ICE, NO WATER and DRAIN lamps all blink together for Er01. Er03 blinks the ICE lamp alone, which is the quick way to tell the two evaporator rows apart.

Read the supporting manual

How does Er01 differ from Er03 and Er25?

Er03 is the same 32 F condition judged after 10 minutes, and Er25 is the reverse problem, an evaporator outlet that dropped below its set temperature for 2 minutes. Er25 shows all three lamps steady, not blinking.

Read the supporting manual

Does room temperature matter?

The guide gives no room temperature link for Er01. Its only temperature statement is for Er25, where the chart says the freezing case occurs when the ambient temperature is low.

Read the supporting manual

The manual behind the message.

Manufacturer document

Install / Use & Care MANUAL / Undercounter Nugget Ice Machine / FNIU515D

Viking Range, LLC (official manual PDF)

Rev C, printed code (051525) / PDF pp.11, 17

Source: the Viking FNIU515D undercounter nugget ice machine manual, p. 17.

Here to help

Good questions.
Clear answers.

Talk to our team
Which lamps blink for Er01?

All three: ICE, NO WATER and DRAIN blink together. If only the ICE lamp blinks, the chart reads that as Er03.

Does Er01 mean the refrigerant leaked?

No. Checking for leakage is the first action the chart lists. The code states only that the evaporator was still warm after 30 minutes.

Why does the chart say resupply power?

The action reads resupply power after resolving the cooling problem. Cutting power is not the fix, and the chart gives no owner repair for the cooling side.

Is there a 5 Series equivalent?

The 5 Series 15 in machines print a Check Water light and a Time to Clean light instead of Er codes.

Let’s take care of it.

The burner will not light.
Let us take a look.