Before work starts
The technician explains the work and agrees the cost with you before starting. A final figure comes after the range, oven or grill has been looked at in person.
Independent appliance repair
We repair Viking built-in electric wall ovens: 3 Series and Professional 5 and 7 Series dial ovens, the RVL touch-screen single and double ovens, and the RVL steam-convection oven. A dead oven, a self-clean door that stays shut, a dark screen or a broil that never starts: book a technician.


The Viking manuals give two causes for an oven light that will not come on: a burned-out bulb or an oven that has lost power entirely. Look at the breaker, then switch the power off before changing the halogen bulb, and handle the new one with a soft cloth. Call us if it stays dark.

Viking touch-control ovens print a short list of errors: MODEL, RTD, PROBE, LATCH and KEYBOARD. Only PROBE has an owner step: seat the probe in its jack, then press OFF. The steam-convection oven asks you to cycle power for 10 seconds and note the F number. Book a technician for the rest.
A wall oven's part depends on its series and control type, so we name none in advance. The technician reads your label, tests the oven and gets your yes on the price before any part goes in.

A Viking self-cleaning oven locks its door with a latch for the cycle. On the 7 Series the guide says the door releases once the oven is at a safe temperature, and if a cycle is canceled in the first 30 seconds the door may stay locked until you turn both knobs to SELF-CLEAN and then OFF. Touch-control wall ovens print LATCH ERROR.

On a Viking touch-control wall oven, the meat probe plugs into a jack in the oven. PROBE ERROR means the probe is open or shorted. The F20813 manual’s first step is simple: the probe may not be plugged in, so plug it in, press OFF to clear the message, and call for service only if the error persists.
How a visit runs.
You know the plan before we arrive.

Pick the range, grill or other appliance and tell us what it does. Add the model number if you can find it.

The technician tests igniters, gas flow and controls, then talks through the findings and agrees the cost with you before any work starts.

After the repair, the technician runs the appliance through its paces and explains what changed.
On a 5 or 7 Series oven, dead oven lights point to the breaker. If the lights work, the MANUAL/TIMED switch has to sit in MANUAL. Do not try to use the oven during a power cut.
The cycle will not start unless the door is shut tight enough for the automatic latch to lock. The knob must also turn past CLEAN until it stops.
A door that will not open means the oven is still in self-clean mode. A hot oven releases its latch once the temperature is safe, so don't force it.
Broil fails if the temperature knob has been turned too far past the broil mark on the 3 Series and the 5 and 7 Series ovens. Back it off to the mark and try again.
If the display and indicator lights are dead, hold the power button beside the screen for 10 seconds, then switch the breaker off and on. Brightness, volume and clock live in the Settings menu.
A new 5 or 7 Series oven smokes and smells for its first few uses as insulation and oils burn off. A steam oven's cooling fan runs on until the electronics have cooled.
The oven stays cold with the breaker on and the clock, switch and temperature setting right.
The door stays locked after the oven has cooled, or the self-clean latch never engages.
The RVL display stays dark after the 10-second hard reset and the breaker cycle.
The screen shows an alert message. Write it down or photograph it before you book.
Wiring, latches and electronics are the technician's work, so leave the hard-wired parts alone.
Arrange a diagnosticThe technician explains the work and agrees the cost with you before starting. A final figure comes after the range, oven or grill has been looked at in person.
Anything covered by Viking's manufacturer warranty is handled by Viking itself. Our own repairs come with a warranty on the workmanship.
Yes. Freestanding ranges and rangetops are on the range page, and this one is for built-in single, double and steam-convection ovens.
The 3 Series electric single and double, the Professional 5 and 7 Series electric ovens, the RVL touch-screen single and double wall ovens and the RVL steam-convection oven.
The door stays latched while the oven is in self-clean mode. If the cavity is hot, the latch releases once the temperature is safe. If it stays shut when cold, book a technician.
Check the oven has power, hold the power button next to the screen for 10 seconds, then turn the breaker off and on. If it stays dark, book a visit.
On a 3 Series oven, open the door and look beneath the control panel on the left. On an RVL oven it is on the serial label, with a second one on top of the unit.
Viking codes, symptoms, parts, visits
LATCH ERROR on a Viking touch-control wall oven means the control cannot lock or unlock the door latch. The table lists a service call and no reset. Do not force the door; book a visit.
The Viking manuals give two causes for an oven light that will not come on: a burned-out bulb or an oven that has lost power entirely. Look at the breaker, then switch the power off before changing the halogen bulb, and handle the new one with a soft cloth. Call us if it stays dark.
A Viking self-cleaning oven locks its door with a latch for the cycle. On the 7 Series the guide says the door releases once the oven is at a safe temperature, and if a cycle is canceled in the first 30 seconds the door may stay locked until you turn both knobs to SELF-CLEAN and then OFF. Touch-control wall ovens print LATCH ERROR.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.