What it means
LATCH ERROR on a Viking touch-control wall oven means the control cannot lock or unlock the door latch. The table lists a service call and no reset. Do not force the door; book a visit.
Viking range LATCH ERROR / Display message
LATCH ERROR on a Viking touch-control wall oven means the control cannot lock or unlock the door latch. The table lists a service call and no reset. Do not force the door; book a visit.
Also shown as LATCH ERROR
LATCH ERROR on a Viking touch-control wall oven means the control cannot lock or unlock the door latch. The table lists a service call and no reset. Do not force the door; book a visit.
Leave the latch alone.
LATCH ERROR returns after you press OFF and start again.
Your Viking checklist, kept on this device only

Leave the latch alone.

See whether the message clears.

Let it cool.

The latch needs a technician.
Pass along the model and the checks you ran, then open a visit request from this spot.
Book a visitA simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Component reference
A Viking self-cleaning oven locks its door with a latch for the cycle.
Read the definitionLATCH ERROR: "The control is unable to lock or unlock the door latch." The correction column says to call for service, which for you means booking a visit.
Read the supporting manualThe latch is activated automatically once Self-Clean is selected, and it holds the door shut while the interior is at cleaning temperatures.
Read the supporting manualLATCH ERROR is one of the two errors the tone table pairs with the Failure signal: five tones, each lasting 1 second. RTD ERROR is the other.
Read the supporting manualManufacturer document
Viking Range, LLC (official manual PDF)
form F20813D EN (040116) / PDF p.34
Manufacturer document
Viking Range, LLC (official manual PDF)
form F20366F EN (071309J) / PDF p.29
Sources: the Viking Professional Built-In Electric Touch Control Single and Double Oven manual (p. 34) and the Professional and Designer Series manual (p. 29).
Not by itself. The manual says the door stays locked until the oven reaches a safe temperature, and it does not call that an error.
If Self-Clean will not start, the manual says the door may not be closed tightly enough for the latch to lock. A LATCH ERROR message is a separate report from the control.
The touch-control single and double ovens in the F20813 manual and the Professional and Designer touch-control ovens in F20366.
The table does not say what state the latch is left in. Do not force the door; leave that to a visit.
Viking codes, symptoms, parts, visits
KEYBOARD ERROR on a Viking touch-control wall oven means there is no connection between the keyboard and the control. The table lists a service call. Switch the oven's breaker off if you want it idle, then book a visit.
A Viking range burner that will not light usually comes down to power, the gas valve, or a dirty igniter. Viking's printed table separates the causes by what you see: no spark, spark but no flame, endless sparking, or a yellow flame. With a gas smell, leave the knobs alone and phone your gas supplier.
A Viking self-cleaning oven locks its door with a latch for the cycle. On the 7 Series the guide says the door releases once the oven is at a safe temperature, and if a cycle is canceled in the first 30 seconds the door may stay locked until you turn both knobs to SELF-CLEAN and then OFF. Touch-control wall ovens print LATCH ERROR.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.