Inside the appliance
Meat probe and PROBE ERROR. In plain English.
On a Viking touch-control wall oven, the meat probe plugs into a jack in the oven. PROBE ERROR means the probe is open or shorted. The F20813 manual’s first step is simple: the probe may not be plugged in, so plug it in, press OFF to clear the message, and call for service only if the error persists.

Where it fits.
Meat probe and PROBE ERROR in the appliance
On the oven wall, a small receptacle where the probe plug goes.
The photo shows the kind of component. It cannot tell you which replacement fits your series.
The signs that this system wants attention.
Meat probe and PROBE ERROR trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.

Viking wall oven controls not responding
On a Viking touch-control wall oven, a long beep followed by a word on the display is a printed error: MODEL, RTD, PROBE, LATCH or KEYBOARD. Only PROBE has a home fix, which is to plug the meat probe in and press OFF. If the whole oven is dead, check power and the MANUAL/TIMED switch.

Viking oven temperature and uneven baking
A Viking oven that bakes unevenly is more often a pan, rack or recipe issue than a broken control. The 5 and 7 Series manual points to pan type, pan count and rack position, and says to cut convection recipes by 25 degrees F. Viking prints no calibration steps, so a true temperature error needs a visit.

Viking oven not heating
When a Viking oven will not heat, Viking's tables start with power: breaker, fuses, and a selected temperature. They also say an oven with its indicator light on that is not heating is operating properly and resumes heating once cooled. Broil that fails often means the knob went past the broil position.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Plug it in
The manual says the meat probe may not be plugged in. Seat it in the oven jack.
- 2
Press OFF
Pressing the OFF key exits and clears the error message.
- 3
Inspect the cable
A bent, kinked or burned probe cable is our own check, not a Viking step. Look before reusing it.
- 4
Try without it
If the message lingers whether or not the probe is plugged in, stop using the probe and book a visit.
Cleaning or replacement?
Leave internal testing to a technician.
PROBE ERROR is still displayed with the probe plugged in.
The error returns on the next cook.
You see RTD ERROR or MODEL ERROR with it.
Arrange a diagnosticSources and model boundaries.
The Meat probe and PROBE ERROR guidance rests on these references. Choose the manual that fits your own series.
- Use & Care / Professional Built-In Electric Touch Control Single and Double Ovens
Rely on the guide for your precise series, and read how we research these pages.
What does PROBE ERROR mean on a Viking oven?
The F20813 manual says the meat probe is open or shorted. It may simply be unplugged, so check that first.
How do I clear it?
Press the OFF key. If the probe was unplugged, plug it back in before you start the next probe cook.
What if it stays after the probe is plugged in?
The manual then says to call for service. Book a visit and have the oven model and serial number ready.
Which Viking ovens have a probe?
The F20813 touch-control wall ovens print this message. Check your own guide, as other series are not covered by this page.
Viking codes, symptoms, parts, visits
From the message to your next move.
PROBE ERROR
PROBE ERROR on a Viking touch-control wall oven means the meat probe is open or shorted. The probe may simply be unplugged: plug it in, or press OFF to clear the message. If the probe is plugged in and the message stays, book a visit.
Viking range burner will not light
A Viking range burner that will not light usually comes down to power, the gas valve, or a dirty igniter. Viking's printed table separates the causes by what you see: no spark, spark but no flame, endless sparking, or a yellow flame. With a gas smell, leave the knobs alone and phone your gas supplier.
Range repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.

