Inside the appliance

Burner ports and air shutters. In plain English.

When a Viking gas burner lights but the flame is large, distorted or yellow, the 3 Series and 7 Series troubleshooting tables list three causes: clogged burner ports, the wrong type of gas, or air shutters that are not adjusted properly. The first is a cleaning job; the other two belong with a technician.

Last reviewed

A gas burner throws tall flames with yellow tips while a neighboring burner cap is tilted up to show its port ring.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Burner ports and air shutters in the appliance

Under each burner cap, where the flame ports and the air shutter at the base of the burner sit.

The photo shows the kind of component. It cannot tell you which replacement fits your series.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.

  1. 1

    Note the flame

    Write down whether it is large, uneven or yellow, and on which burner.

  2. 2

    Check the burner seating

    Make sure the burner head and cap sit flat on the base. A tilted cap changes the flame.

  3. 3

    Clear the ports

    The tables name clogged ports. Clean them with the burner cool, following your range guide.

  4. 4

    Leave the air shutter and gas type

    Both are listed as causes. Adjusting the shutters or changing the gas setup is work for a technician.

Cleaning or replacement?

Leave internal testing to a technician.

The flame stays yellow or uneven after the ports are clean and the burner is seated.

The range was moved or converted and the flame changed afterward.

You see soot on cookware or smell gas.

Arrange a diagnostic

Sources and model boundaries.

The Burner ports and air shutters guidance rests on these references. Choose the manual that fits your own series.

  • Use & Care / Professional Freestanding Ranges / Built-In Rangetops
  • Use & Care / 3 Series / Freestanding 30” Gas / Self-Clean Sealed Burner Range
  • User / Install Guide / 5 Series Gas Side Burner Accessories / VQGSB5131 | VQGPB5201

Rely on the guide for your precise series, and read how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why is my Viking burner flame yellow?

The troubleshooting tables list clogged burner ports, the wrong type of gas or air shutters not adjusted properly. Clean the ports first, then book a visit.

Is a little orange at the tip normal?

Viking’s side burner guide says orange tips can be normal with dusty air or heavy grease. A mostly yellow flame points to a lack of air.

Can I adjust the air shutters myself?

Viking’s side burner guide covers it only with the unit fully cool and all controls off. On a range, we suggest leaving it to the technician.

What if the range runs on the wrong gas?

The table lists it as a cause of a large or yellow flame. A technician checks the gas type and settings for your model.

Let’s take care of it.

The burner will not light.
Let us take a look.