Inside the appliance
Igniters and sealed burners. In plain English.
A Viking gas range lights each burner with an igniter that clicks and sparks as the knob turns. The 3 Series and 7 Series troubleshooting tables list a tripped circuit or blown fuse for igniters that do nothing, a closed gas valve or interrupted supply for sparks without flame, and wet or dirty igniters for constant clicking.

Where it fits.
Igniters and sealed burners in the appliance
Beside each burner head on the cooktop, a small ceramic or metal tip that sparks.
The photo shows the kind of component. It cannot tell you which replacement fits your series.
The signs that this system wants attention.
Igniters and sealed burners trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Check the power
No spark at all: the tables list a tripped circuit, a blown fuse or a range not connected to power.
- 2
Check the gas valve
Sparks but no flame: the tables list the gas supply valve in the OFF position or an interrupted supply.
- 3
Dry and clean the igniters
Continuous sparking after the flame lights: the tables list a wet or dirty igniter, a range power supply not grounded, or reversed polarity.
- 4
Smell gas? Leave
Viking’s side burner guide has you shut everything off and call the gas company or a qualified plumber to check for leaks. Leave the repair to a technician.
Cleaning or replacement?
Leave internal testing to a technician.
Sparks come but no flame appears with gas on and the burner parts seated.
Sparking keeps going after the flame is lit and the igniter has dried.
You smell gas at any time.
Arrange a diagnosticSources and model boundaries.
The Igniters and sealed burners guidance rests on these references. Choose the manual that fits your own series.
- Use & Care / Professional Freestanding Ranges / Built-In Rangetops
- Use & Care / 3 Series / Freestanding 30” Gas / Self-Clean Sealed Burner Range
- User / Install Guide / 5 Series Gas Side Burner Accessories / VQGSB5131 | VQGPB5201
Rely on the guide for your precise series, and read how we research these pages.
Why does my Viking burner click but not light?
The troubleshooting table lists the gas supply valve being off or an interrupted supply. If the valve is open and it still sparks without flame, book a technician.
Why does it keep clicking after it lights?
The tables list wet or dirty igniters, an ungrounded power supply or reversed polarity. Dry the igniter; the other two need an electrician or technician.
What if none of the igniters work?
The tables list a circuit that is tripped, a fuse that is blown, or a range not connected to power. Check the breaker first.
What if I smell gas?
Turn off all burners and the main gas supply, leave, and call your gas company or a qualified plumber, as Viking’s guide directs. Do not light anything.
Viking codes, symptoms, parts, visits
From the message to your next move.
Error Code (red backlight)
A red backlight on the knob rings of a Viking 7 Series professional range or rangetop signals an error. The oven and griddle rings flash a set number of times for each code. The manual prints no table of ring counts, so count the flashes and book a visit.
Viking range burner will not light
A Viking range burner that will not light usually comes down to power, the gas valve, or a dirty igniter. Viking's printed table separates the causes by what you see: no spark, spark but no flame, endless sparking, or a yellow flame. With a gas smell, leave the knobs alone and phone your gas supplier.
Range repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.

