Viking range Error Code (red backlight) / Display message

Viking range
error Error Code (red backlight)

Range / display referenceError Code (red backlight)

A red backlight on the knob rings of a Viking 7 Series professional range or rangetop signals an error. The oven and griddle rings flash a set number of times for each code. The manual prints no table of ring counts, so count the flashes and book a visit.

Also shown as Red backlight

Last reviewed

Range / display referenceError Code (red backlight)
Meaning
A red backlight on the knob rings of a Viking 7 Series professional range or rangetop signals an error. The oven and griddle rings flash a set number of times for each code. The manual prints no table of ring counts, so count the flashes and book a visit.
Who handles it
Book a visit
Related codes
Source
Use & Care / Professional Freestanding Ranges / Built-In Rangetops

What Viking range Error Code (red backlight) means.

What it means

A red backlight on the knob rings of a Viking 7 Series professional range or rangetop signals an error. The oven and griddle rings flash a set number of times for each code. The manual prints no table of ring counts, so count the flashes and book a visit.

What you can safely check

Note the number of flashes on each ring.

When to call a technician

A knob ring keeps flashing red.

Your Viking checklist, kept on this device only

Safe checks, in order.

0 of 4 checks done
  1. Viking range Error Code (red backlight): Range control panel with backlit steel knobs and a dim display, oven door open on a roast with a meat probe cable plugged into the oven wall
    Illustration. Follow your model’s instructions.
    Before you begin

    Count the flashes

    Note the number of flashes on each ring.

  2. Ranges in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Note which ring

    Oven or griddle.

  3. Heavy metal control knobs on a professional-style range
    Illustration. Follow your model’s instructions.
    Check 3

    Turn the knobs off

    Make sure all controls are off.

  4. A technician holds a tablet showing a blank checklist beside a stainless gas range with a skillet on a lit burner.
    Illustration. Follow your model’s instructions.
    Check 4

    Book a visit

    No owner steps are listed.

Still showing Error Code (red backlight)?

Pass along the model and the checks you ran, then open a visit request from this spot.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 2Control board
  3. 3Element wiring

A simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Parts behind the message.

A row of range knobs with glowing red rings on a stainless panel, a skillet and pot above on the burners.

Component reference

Backlit knobs and the red error light

The knobs on a Viking 7 Series range and rangetop have lit rings and a backlit bezel.

Read the definition

A little more context.

What does the manual say about the red backlight?

Under Error Code in the backlit knob features, it says the backlight will be red, and that the griddle or oven knob rings should flash at a defined rate and quantity for each error code.

Read the supporting manual

Does the night light setting hide it?

No. The manual says the error code will still function when the number 2 switch is cycled to off. Colors cycle between blue, white and off.

Read the supporting manual

What other colors might you see?

Self-Clean uses a yellow backlight, and after the door unlocks the rings revert to Viking blue until the knobs are turned off. A red backlight is separate from both.

Read the supporting manual

Which knobs flash?

The error text names the griddle and oven knobs. The burner knob lighting list describes no error behavior.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care / Professional Freestanding Ranges / Built-In Rangetops

Viking Range, LLC (official manual PDF)

form 066424-000 / PDF p.11

Source: the Viking 7 Series professional range and rangetop use and care manual.

Here to help

Good questions.
Clear answers.

Talk to our team
Do I turn the knobs to off?

Yes, make sure every knob is off, as our general safety step. The manual prints no reset for the red backlight.

Is red the same as the preheat pulse?

No. Preheat rings pulse until the temperature is first reached, then stay solid. Red belongs to the error code.

What is the number 2 switch?

One of two buttons on the underside of the bull nose. Button 1 turns the night light on, and holding button 2 cycles its color.

Which models have backlit knobs?

The 7 Series professional ranges and rangetops (VDR, VGR, VRT 736 and 748), per the cited manual.

Let’s take care of it.

The burner will not light.
Let us take a look.