Inside the appliance

Backlit knobs and the red error light. In plain English.

The knobs on a Viking 7 Series range and rangetop have lit rings and a backlit bezel. The color has a meaning: blue or white in normal use, yellow during self-clean, and red for an error. In red, the rings flash a count for the error code, though the guide prints no table that decodes it.

Last reviewed

A row of range knobs with glowing red rings on a stainless panel, a skillet and pot above on the burners.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Backlit knobs and the red error light in the appliance

Around each control knob on the front of the range or rangetop, and in the bezel under the bullnose.

The photo shows the kind of component. It cannot tell you which replacement fits your series.

The signs that this system wants attention.

Backlit knobs and the red error light trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.

  1. 1

    Note the color

    Red backlight means an error. Yellow means self-clean. Blue and white are normal.

  2. 2

    Count the flashes

    On griddle and oven knobs, the guide says rings flash for the corresponding error code at a defined rate and quantity.

  3. 3

    Write down which knob

    Record which rings flash and how many times before you reset anything.

  4. 4

    Switch the night light off

    Button 2 cycles the backlight between blue, white and off, and the error code still functions with it off.

Cleaning or replacement?

Leave internal testing to a technician.

The bezel is red and the rings flash a repeating count.

Knob lights stay off in normal use.

The self-clean yellow stays on after the door has unlocked.

Arrange a diagnostic

Sources and model boundaries.

The Backlit knobs and the red error light guidance rests on these references. Choose the manual that fits your own series.

  • Use & Care / Professional Freestanding Ranges / Built-In Rangetops

Rely on the guide for your precise series, and read how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does a red backlight mean on a Viking range?

It marks an error. The 7 Series guide says the rings flash a count for the code, but it does not print a table that says what each count means.

Can I turn the knob lights off?

Button 2 cycles blue, white and off. The guide notes that the error code still functions when the light is cycled to off.

Why is the backlight yellow?

Yellow marks self-clean in the guide. It turns solid yellow and then fades once the door is unlocked.

How do I report the code?

Count the flashes on each flashing ring, note which knob it was, and tell us when you book. The technician can then plan the visit.

Let’s take care of it.

The burner will not light.
Let us take a look.