What it means
Other F__ Error on a Viking RVL steam-convection oven (MVSOC6301) means an F code appeared that the manual does not name. Remove power, wait 10 seconds and restore it. If it persists, note the code and book a visit.
Viking range Other F__ Error / Not decoded
Other F__ Error on a Viking RVL steam-convection oven (MVSOC6301) means an F code appeared that the manual does not name. Remove power, wait 10 seconds and restore it. If it persists, note the code and book a visit.
Also shown as Other F__ Error
Other F__ Error on a Viking RVL steam-convection oven (MVSOC6301) means an F code appeared that the manual does not name. Remove power, wait 10 seconds and restore it. If it persists, note the code and book a visit.
Write down every character.
The F code returns after the 10-second power cycle.
Your Viking checklist, kept on this device only

Write down every character.

Switch off at the breaker.

Then restore it.

A returning code needs a technician.
Pass along the model and the checks you ran, then open a visit request from this spot.
Book a visitA simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.
The Operational Issues table lists "Other F Error appears in the display window." The remedy: remove power and turn it back on after 10 seconds. If the condition persists, note the code number (see the EVENT LOG list) and contact service.
Read the supporting manualOn the System menu, Event Logs is described as the location where errors will be logged should issues arise.
Read the supporting manualIt sits first in that table, ahead of the display staying OFF, the cooling fan running after turn-off and the oven not heating. Those have their own remedies, so a blank display is not this entry.
Read the supporting manualThe table names the code number as the thing to report. This record cannot list the F numbers because the manual prints none.
Read the supporting manualManufacturer document
Viking Range, LLC (official manual PDF)
printed code 085039-000 / PDF p.41
Source: the Viking MVSOC steam-convection oven manual.
In the System menu of the oven display, under Event Logs. The manual describes it in one line and prints no list of codes.
No. The manual says the fan turns off automatically when the electronic components have cooled.
That row has a different remedy: turn off the main power at the fuse or breaker, then turn it back on.
Nothing here. Demo is another System menu setting that shows DEMO in the corner of the screen.
Viking codes, symptoms, parts, visits
MODEL ERROR on a Viking touch-control wall oven says an incorrect model number has been installed. Viking's table tells you to call a service agency. Write the message down and book a visit.
A Viking range burner that will not light usually comes down to power, the gas valve, or a dirty igniter. Viking's printed table separates the causes by what you see: no spark, spark but no flame, endless sparking, or a yellow flame. With a gas smell, leave the knobs alone and phone your gas supplier.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.