What it means
PROBE ERROR on a Viking touch-control wall oven means the meat probe is open or shorted. The probe may simply be unplugged: plug it in, or press OFF to clear the message. If the probe is plugged in and the message stays, book a visit.
Viking range PROBE ERROR / Display message
PROBE ERROR on a Viking touch-control wall oven means the meat probe is open or shorted. The probe may simply be unplugged: plug it in, or press OFF to clear the message. If the probe is plugged in and the message stays, book a visit.
Also shown as PROBE ERROR
PROBE ERROR on a Viking touch-control wall oven means the meat probe is open or shorted. The probe may simply be unplugged: plug it in, or press OFF to clear the message. If the probe is plugged in and the message stays, book a visit.
Make sure the probe is plugged in all the way.
PROBE ERROR stays with the probe plugged in.
Your Viking checklist, kept on this device only

Make sure the probe is plugged in all the way.

This clears the message.

Look for a damaged cable.

If the message stays with the probe plugged in, book a visit.
Pass along the model and the checks you ran, then open a visit request from this spot.
Book a visitA simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Component reference
On a Viking touch-control wall oven, the meat probe plugs into a jack in the oven.
Read the definitionPROBE ERROR: the meat probe is open or shorted. The probe may not be plugged in; if it isn't, plug it into the oven and press OFF to exit and clear the message. If it is plugged in and the message stays, book a visit.
Read the supporting manualInto the outlet on the left interior wall of the oven. Double oven models have a meat probe in the upper oven only.
Read the supporting manualThe care notes say never to pull the cable with tongs, use the handles of the probe and plug, and never leave the probe inside during a self-cleaning cycle. They also say not to store it in the oven.
Read the supporting manualThe display shows LO until the probe reaches 100 F, then the actual temperature. The target must be between 120 and 190 F.
Read the supporting manualManufacturer document
Viking Range, LLC (official manual PDF)
form F20813D EN (040116) / PDF p.34
Manufacturer document
Viking Range, LLC (official manual PDF)
form F20366F EN (071309J) / PDF p.29
Sources: the Viking Professional Built-In Electric Touch Control Single and Double Oven manual (p. 34) and the Professional and Designer Series manual (p. 29).
The manual marks the meat probe as available on Premiere models. Models without it cannot show this message.
Yes, with time cooking. A cooking mode must be selected before setting the probe, so the probe is optional.
The care table says to cool it first, wash with soap and water or a soap-filled pad, and not immerse it in water.
The message means the circuit is open or shorted. A cable damaged by tongs or heat would produce that, though the manual does not name a cable cause.
Viking codes, symptoms, parts, visits
RTD ERROR on a Viking touch-control wall oven means the RTD is open or shorted. RTD is the printed label; Viking does not expand it. The table lists no step for you except a service call, so book a visit.
A Viking range burner that will not light usually comes down to power, the gas valve, or a dirty igniter. Viking's printed table separates the causes by what you see: no spark, spark but no flame, endless sparking, or a yellow flame. With a gas smell, leave the knobs alone and phone your gas supplier.
On a Viking touch-control wall oven, the meat probe plugs into a jack in the oven. PROBE ERROR means the probe is open or shorted. The F20813 manual’s first step is simple: the probe may not be plugged in, so plug it in, press OFF to clear the message, and call for service only if the error persists.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.