Inside the appliance
Air-cooled condenser and Time to Clean. In plain English.
Viking 5 Series clear and nugget ice machines are cooled by a condenser the guides compare to a car radiator: fins and tubes that clog with dirt and lint. The Time to Clean light comes on after 6 months of use. For low capacity, the troubleshooting guide says to clean the air-cooled condenser fins.

Where it fits.
Air-cooled condenser and Time to Clean in the appliance
Behind the kickplate and front service panel at the bottom front of the machine.
The photo shows the kind of component. It cannot tell you which replacement fits your series.
The signs that this system wants attention.
Air-cooled condenser and Time to Clean trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.

Viking ice maker not making ice
On a Viking undercounter ice machine, little or no ice usually traces to the control position, the water supply, a blocked drain, a dirty condenser or scale on the evaporator. Check the switch and the water first, then clean the system. Book a technician if the bin stays empty.

Viking ice maker ice smells or tastes off
Gray, smelly or off-tasting ice from a Viking ice machine usually means mineral scale on the evaporator, hard water, food stored in the bin or an old charcoal filter. Clean the machine, empty the bin of anything but ice and consider a filter. Call us if the taste stays after cleaning.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Switch off
Turn the machine off with the On/Off button first.
- 2
Vacuum the surface
Remove the kickplate and front service panel, then vacuum all dust and lint from the condenser surface.
- 3
Protect the fins
The guide says do not dent the fins.
- 4
Run the scale clean
Time to Clean also calls for cleaning the ice making system with Ice Machine Scale Remover.
Cleaning or replacement?
Leave internal testing to a technician.
Ice output stays low after the condenser is clean and the drain is clear.
Time to Clean comes back right after a full cleaning cycle.
Cubes stay ragged after scale removal.
Arrange a diagnosticSources and model boundaries.
The Air-cooled condenser and Time to Clean guidance rests on these references. Choose the manual that fits your own series.
- Use & Care / 15"W. Undercounter/Freestanding Ice Machine / FGIM5151 FPIM5151
- Use & Care / 5 SERIES / 15"W. Undercounter/Freestanding Nugget Ice Machine
Rely on the guide for your precise series, and read how we research these pages.
What does Time to Clean mean?
The light comes on after 6 months of use and stays on until the ice making system is cleaned.
Why is my ice machine making little ice?
The clear ice guide lists a restricted drain, standing water in the bin, or dirty condenser fins. Check those first.
What is the cleaning method?
Remove the kickplate and front panel, vacuum the surface without denting the fins, and put the panels back.
What if cubes look ragged?
The guide says mineral scale must be removed from the ice making system.
Viking codes, symptoms, parts, visits
From the message to your next move.
Time to Clean
The Time to Clean light on a Viking 5 Series 15 in ice machine comes on after 6 months of use. Clean the ice making system. It is a reminder, not a breakdown.
Viking ice maker not making ice
On a Viking undercounter ice machine, little or no ice usually traces to the control position, the water supply, a blocked drain, a dirty condenser or scale on the evaporator. Check the switch and the water first, then clean the system. Book a technician if the bin stays empty.
Ice maker repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.

