Inside the appliance
Water level sensor and Er15 / Er16. In plain English.
The FNIU515D nugget ice machine uses a water level sensor to confirm water is arriving and draining. If no level is detected for 2 minutes of water supply, the display shows Er15; if the lower limit is not detected within 2 minutes of draining, it shows Er16. The table lists a water supply pressure check and a sensor check as the action.

Where it fits.
Water level sensor and Er15 / Er16 in the appliance
Inside the machine. The guide names the sensor but does not show where it sits, so a technician locates it.
The photo shows the kind of component. It cannot tell you which replacement fits your series.
The signs that this system wants attention.
Water level sensor and Er15 / Er16 trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Check the supply
Water supply pressure is the first action the table lists for Er15.
- 2
Check the drain
For Er16 the table lists the drain valve operation alongside the sensor.
- 3
Read the lamps
Er15 blinks the No Water lamp; Er16 blinks the Drain lamp.
- 4
Restart after the action
The table says to start operation again once the action is done.
Cleaning or replacement?
Leave internal testing to a technician.
Er15 or Er16 returns after the supply and drain are clear.
The No Water lamp stays on with water flowing.
The machine shuts down with water in the reservoir.
Arrange a diagnosticSources and model boundaries.
The Water level sensor and Er15 / Er16 guidance rests on these references. Choose the manual that fits your own series.
- Install / Use & Care MANUAL / Undercounter Nugget Ice Machine / FNIU515D
Rely on the guide for your precise series, and read how we research these pages.
What is Er15?
A water supply error: the water level sensor did not detect water within 2 minutes of supply.
What is Er16?
A water drain error: the lower limit level was not detected within 2 minutes while the drain valve operated.
What does the table tell me to do?
Check supply pressure, the water level sensor and the drain valve operation, then restart.
Can I replace the sensor myself?
The table lists sensor replacement as an action, which we suggest leaving to a technician.
Viking codes, symptoms, parts, visits
From the message to your next move.
Er15
Er15 on a Viking FNIU515D nugget ice machine is a water supply error: the water level sensor found no water for 2 minutes. The chart lists a water supply pressure check and a water level sensor check, then restart.
Viking ice maker not making ice
On a Viking undercounter ice machine, little or no ice usually traces to the control position, the water supply, a blocked drain, a dirty condenser or scale on the evaporator. Check the switch and the water first, then clean the system. Book a technician if the bin stays empty.
Ice maker repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.

