Inside the appliance
Drain hose and high loop. In plain English.
The drain hose carries wash water out of a Viking built-in dishwasher toward the plumbing under your sink. The 451 Series chart lists a clogged or kinked hose when the machine will not drain, and asks for a cone fitting cut to an inner diameter of at least 3/4 inch. The 324 Series chart adds a high loop.

Where it fits.
Drain hose and high loop in the appliance
Behind the lower front panel, leading off to the plumbing under the sink.
The photo shows the kind of component. It cannot tell you which replacement fits your series.
The signs that this system wants attention.
Drain hose and high loop trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.

Viking dishwasher controls not responding
On a Viking 451 or 324 Series dishwasher, a dark panel is often normal: cycle and option buttons only light after you select them. Select START, shut the door inside 4 seconds, and the cycle begins. If the lights flash instead, use the reset: hold START for 4 seconds.

Viking dishwasher leaking
The Viking dishwasher manuals print no leak entry in their troubleshooting chart. What they do print is PAN FLOOD: both cycle lights flash continuously, and the chart's only action is to reset by holding START for 4 seconds. Water on the floor calls for the supply shut and a visit, not repeated resets.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Look for a kink
The 451 chart says to make sure there are no folds or sharp bends in the drain hose.
- 2
Check the fitting
It also says foreign particles can lodge at the connection, and the cone-shaped fitting must be cut to at least 3/4 inch (1.9 cm) inside.
- 3
Check the high loop
The 324 Series chart says to verify the hose has the high loop shown in its installation guide.
- 4
Check the sink side
If water backs up into the sink, the chart points to the disposer and trap for blockage.
Cleaning or replacement?
Leave internal testing to a technician.
Water lingers in the tub even though the hose runs straight and the sink side is clear.
Water backs up into the sink every time the dishwasher drains.
A flash code repeats after you reset the unit by holding START for 4 seconds.
Arrange a diagnosticSources and model boundaries.
The Drain hose and high loop guidance rests on these references. Choose the manual that fits your own series.
- Viking Use & Care Manual / 451 Series Built-In Dishwashers
- Use & Care / 324 Series Built-In Dishwashers
Rely on the guide for your precise series, and read how we research these pages.
Why will my Viking dishwasher not drain?
The 451 Series chart lists a door not latched, a crimped feed line, a clogged or kinked drain hose and a blocked disposer or trap. Work through those, then book a visit.
What is the high loop?
A raised bend in the drain hose that stops sink water from flowing back. The 324 Series chart tells you to verify it per the installation guide.
Why does water back up in my sink?
The 451 chart points to the food waste disposer and trap. Check for blockage there first.
Is a drain pump involved?
The 451 guide says the drain pump runs to clear water after you change a program. If the hose is clear and it still holds water, the pump needs a technician.
Viking codes, symptoms, parts, visits
From the message to your next move.
PAN FLOOD
PAN FLOOD on a Viking built-in dishwasher is shown by both lights, POTS/PANS and NORMAL WASH, flashing continuously. Viking prints only a reset: hold START for 4 seconds. If water reaches the floor, shut the supply valve and book a technician.
Viking dishwasher not cleaning well
A Viking dishwasher that leaves dishes dirty or cloudy is, per Viking's chart, mostly a loading, detergent or filter matter. Check the filters and strainer first, then the wash arms, rinse agent and detergent amount. Odor and slow drying have their own entries, covered below.
Dishwasher repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.
