Read the whole display
Say which hood series you have and which light is on.
Model-specific code library
Five hood behaviors are decoded: the fourth white LED, a blower that jumps to high, the first fan-speed LED flashing, the filter clean icon blinking and the green indicator LED. None is an error.
A Viking hood blower that jumps to high on its own is usually its heat sensor thermostat reacting to hot air above the cooktop. It speeds the fan up, then returns to your setting when things cool. Unplug the hood before cleaning.
Read the Blower comes on at high by itself checks5 researched hood codes. What a message means shifts from one Viking series to the next, so your own manual settles it.
A Viking hood blower that jumps to high on its own is usually its heat sensor thermostat reacting to hot air above the cooktop. It speeds the fan up, then returns to your setting when things cool. Unplug the hood before cleaning.
NormalA blinking filter clean icon on a Viking 5 Series downdraft means the blower has run 30 hours since the last reset. Wash the two grease filters, then touch and hold the icon for two seconds or more to reset it.
Clean the filtersWhen the first white speed LED flashes on a Viking Pureline Pro, the run-on function is active. The fan keeps pulling at low speed for 10 minutes after cooking and then switches itself off, leaving the ambient light on.
NormalThe fourth white LED coming on at a Viking ceiling hood from the Pureline Pro line means Power mode, its strongest extraction. It is meant for smoke, strong odor or heavy vapor, and drops back to speed 3 after 6 minutes.
NormalOn a Viking Pureline Pro ceiling hood the green LED lights after 20 cooking hours to say the grease filter needs cleaning. Wash it by hand or in the dishwasher. Never run the hood without its grease filters.
Clean the filter
Five hood behaviors are decoded: the fourth white LED, a blower that jumps to high, the first fan-speed LED flashing, the filter clean icon blinking and the green indicator LED. None is an error.
Four hood manuals are read: Pureline Pro, 3 Series, 5 Series and downdraft. Other Viking hoods may differ.
Say which hood series you have and which light is on.
Turn the hood off at the wall switch before you remove filters.
A Viking hood that lets smoke and steam escape is usually clogged filters, too low a fan speed, a draft across the cooktop or a charcoal filter past its life. Clean the grease filters, raise the speed and replace a recirculating charcoal filter. Book a technician if the airflow stays weak.
A Viking Pureline Pro ceiling hood can stop for four reasons the guide names: the motor’s thermal switch, the 3-hour auto-stop, the 10-minute run-on and a remote that lost its code after a power cut. Wait 3 minutes after power returns, then try the remote again. Call us if it keeps stopping.
Rely on the guide for your precise series, and read how we research these pages.
Four hood manuals are read: Pureline Pro, 3 Series, 5 Series and downdraft. Other Viking hoods may differ.
Snap the whole hood display and the data plate. Note what the appliance was doing the moment the message came up, and do not borrow an explanation meant for some other product.
A phrase people once searched for is no substitute for the maker's own wording. When our hood documents leave a message undecoded, it stays listed by name and we point you to help without naming any part or cause.
Open a manufacturer document from this hood library and match the model on its cover to the plate on your appliance. A different series comes with its own guide.