What it means
When the first white speed LED flashes on a Viking Pureline Pro, the run-on function is active. The fan keeps pulling at low speed for 10 minutes after cooking and then switches itself off, leaving the ambient light on.
Viking hood First white fan-speed LED flashing / Mode, not a failure
When the first white speed LED flashes on a Viking Pureline Pro, the run-on function is active. The fan keeps pulling at low speed for 10 minutes after cooking and then switches itself off, leaving the ambient light on.
Also shown as First white fan-speed LED flashing
When the first white speed LED flashes on a Viking Pureline Pro, the run-on function is active. The fan keeps pulling at low speed for 10 minutes after cooking and then switches itself off, leaving the ambient light on.
The fan runs in run-on for 10 minutes.
The LED keeps flashing past ten minutes.
Your Viking checklist, kept on this device only

The fan runs in run-on for 10 minutes. The flashing LED stops when the fan switches off.

During run-on the light drops to ambient mode, so a changed light level is part of the same function.

Press the power button twice on the remote to switch the fan off with no run-on at all.

If the hood is left running and the controls are not touched, it switches itself off after 3 hours.
Pass along the model and the checks you ran, then open a visit request from this spot.
Book a visit

A simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.
A timed extraction at the end of cooking. For a fixed time the hood removes the remaining vapors at low speed.
Read the supporting manualPress the power button once. The lighting changes to ambient mode and the first white speed LED flashes.
Read the supporting manualAfter 10 minutes the fan switches off, and the ambient lighting stays on.
Read the supporting manualPress the power button twice and the motor goes off at once with no run-on.
Read the supporting manualManufacturer document
Viking Range, LLC (official manual PDF)
no edition code in the cached text / PDF p.7
Manufacturer document
Viking Range, LLC (official manual PDF)
no edition code in the cached text / PDF p.15
Printed only for the MVCEH636 and MVCEH648 ceiling hoods, operated from a remote or the Novy Connect app.
No. It shows the run-on function is working, with the fan at its lowest speed.
Starting run-on switches the lighting to ambient mode, which is dimmer than cooking mode.
Press the power button twice. That ends extraction without the 10-minute run-on.
Yes. Auto-Stop switches the fan off after 3 hours if nothing has been changed on the control.
Viking codes, symptoms, parts, visits
The fourth white LED coming on at a Viking ceiling hood from the Pureline Pro line means Power mode, its strongest extraction. It is meant for smoke, strong odor or heavy vapor, and drops back to speed 3 after 6 minutes.
A Viking hood that lets smoke and steam escape is usually clogged filters, too low a fan speed, a draft across the cooktop or a charcoal filter past its life. Clean the grease filters, raise the speed and replace a recirculating charcoal filter. Book a technician if the airflow stays weak.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.