Inside the appliance
Grease filter indicator (green LED). In plain English.
The RVL Pureline Pro ceiling hood counts cooking hours. After 20 hours of cooking, a green LED on the hood tells you the grease filter needs cleaning. The guide says never to run the hood without the grease filters, because heavy contamination creates a fire risk.

Where it fits.
Grease filter indicator (green LED) in the appliance
On the hood’s remote and indicator panel, with the filter behind the bottom panel.
The photo shows the kind of component. It cannot tell you which replacement fits your series.
The signs that this system wants attention.
Grease filter indicator (green LED) trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.

Viking hood not pulling smoke or steam
A Viking hood that lets smoke and steam escape is usually clogged filters, too low a fan speed, a draft across the cooktop or a charcoal filter past its life. Clean the grease filters, raise the speed and replace a recirculating charcoal filter. Book a technician if the airflow stays weak.

Viking hood shuts off or ignores the remote
A Viking Pureline Pro ceiling hood can stop for four reasons the guide names: the motor’s thermal switch, the 3-hour auto-stop, the 10-minute run-on and a remote that lost its code after a power cut. Wait 3 minutes after power returns, then try the remote again. Call us if it keeps stopping.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Watch the green LED
After 20 cooking hours the green indicator lights, per the guide.
- 2
Open the bottom panel
Pull down at both ends of the bottom panel together, then pull the filter handle down to remove it.
- 3
Clean by hand
The guide prefers hand washing: soak 15-20 minutes in hot water with mild detergent or baking soda, scrub gently and rinse.
- 4
Never run it bare
Keep the grease filters installed whenever the hood is on.
Cleaning or replacement?
Leave internal testing to a technician.
The green LED stays lit after the filters are cleaned and refitted.
The bottom panel will not seat on its hinges.
The motor stops and will not restart after it cooled.
Arrange a diagnosticSources and model boundaries.
The Grease filter indicator (green LED) guidance rests on these references. Choose the manual that fits your own series.
- User Guide / RVL - 36" or 48" Pureline Pro Ceiling Hood / MVCEH636BK MVCEH648BK
Rely on the guide for your precise series, and read how we research these pages.
What does the green light on my Viking ceiling hood mean?
The grease filter has had 20 cooking hours and needs cleaning.
Can I wash the filter in a dishwasher?
The metal filter can go in one, but Viking recommends cleaning it by hand.
Is it safe to run the hood without the filters?
No. The guide warns of a fire risk from excessive contamination and says not to operate the unit without grease filters.
What if the motor stops?
The guide says the motor has a thermal switch that switches it off on overheating. Let it cool, and schedule a visit should it fail again.
Viking codes, symptoms, parts, visits
From the message to your next move.
Viking hood not pulling smoke or steam
A Viking hood that lets smoke and steam escape is usually clogged filters, too low a fan speed, a draft across the cooktop or a charcoal filter past its life. Clean the grease filters, raise the speed and replace a recirculating charcoal filter. Book a technician if the airflow stays weak.
Hood repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.

