Start from the symptom
Viking hood shuts off or ignores the remote.
A Viking Pureline Pro ceiling hood can stop for four reasons the guide names: the motor’s thermal switch, the 3-hour auto-stop, the 10-minute run-on and a remote that lost its code after a power cut. Wait 3 minutes after power returns, then try the remote again. Call us if it keeps stopping.

Start with safe observations.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Run-on and auto-stop
After you press the off button once, the fan keeps going for 10 minutes on low and then stops. Whatever the setting, the fan also switches off after 3 hours if the control has not been changed.
- 2
The motor’s thermal switch
The motor switches off when it overheats, then restarts once it has cooled. The guide says the cause of the overheating has to be found, for example a pan fire, a blocked impeller or an object in the exhaust opening.
- 3
After a power cut
If power was disconnected and switched on again, wait 3 minutes before using the remote. This stops the code from changing so the hood does not stop responding.
- 4
Check the remote code
Press the two code buttons together and the lamp flashes as many times as the code number. There are 10 codes, so another remote or transmitter nearby can disturb the hood.
- 5
Lights are separate
The guide says the light works independently of the motor, so lights on with a stopped fan is normal after run-on or auto-stop.
Systems a technician may investigate.
The parts below connect to this symptom. Seeing it does not establish that any one of them is the culprit.
If the display adds a code.
No code is tied straight to this topic.
Nothing else in our researched codes connects to this topic. Match the exact message to your series' manual, and do not swap in another code from the library.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
The hood stops again and again with clean filters and a clear exhaust.
You suspect a blocked impeller or a foreign object in the exhaust opening.
The hood ignores the remote after you waited 3 minutes and reset the code.
You find signs of a grease fire.
Arrange a diagnosticSources and model boundaries.
The Viking hood shuts off or ignores the remote guidance rests on these references. Choose the manual that fits your own series.
- User Guide / RVL - 36" or 48" Pureline Pro Ceiling Hood / MVCEH636BK MVCEH648BK
Rely on the guide for your precise series, and read how we research these pages.
Why does my Viking hood turn off after three hours?
Auto-Stop is built in so the hood is not left running. The fan switches off after 3 hours if the control has not been changed in that time. The lighting stays on in ambient mode.
Why does the fan run for 10 minutes after I switch off?
That is the run-on function. It extracts the remaining vapor at low speed for 10 minutes. Press the off button twice to switch off without run-on.
Is the hood broken if it switches off while hot?
Not necessarily. The motor has a thermal switch that stops it when it overheats and restarts it after cooling. The guide says to find what made it overheat.
How do I change the remote code?
The guide has 10 codes. Switch the hood power off and on to open a 3-minute set-up window, press the code buttons together, and confirm within 10 seconds.
Viking codes, symptoms, parts, visits
From the message to your next move.
Viking hood not pulling smoke or steam
A Viking hood that lets smoke and steam escape is usually clogged filters, too low a fan speed, a draft across the cooktop or a charcoal filter past its life. Clean the grease filters, raise the speed and replace a recirculating charcoal filter. Book a technician if the airflow stays weak.
Grease filter indicator (green LED)
The RVL Pureline Pro ceiling hood counts cooking hours. After 20 hours of cooking, a green LED on the hood tells you the grease filter needs cleaning. The guide says never to run the hood without the grease filters, because heavy contamination creates a fire risk.
Hood repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.

