On this page
- Baffle and mesh filters can be washed in a dishwasher or hot soapy water and must not be taken apart. 12
- Charcoal filters on recirculating hoods are replaced every 6 months to 1 year, never washed in a dishwasher. 12
- The RVL ceiling hood lights a green LED after 20 cooking hours and suggests cleaning the grease filter monthly. 3
- Never run a ceiling hood without its grease filters; contaminated filters risk fire. 3
- Unplug the hood from its control panel before cleaning or servicing. 12
Which filter does my Viking hood have?#
It depends on the hood. Professional wall hoods in the VWH family use stainless baffle filters. The 3 Series chimney hoods use mesh filters, and a recirculating version adds charcoal. The RVL Pureline Pro ceiling hood has a metal grease filter and a green reminder light. 123
The three user guides we cite are separate documents, and their care steps overlap only in part, so the first job is to match your hood to one of the rows below. The model number is on the hood or in your paperwork.
| Hood | Filter | Cleaning | Reminder |
|---|---|---|---|
| Professional VWH wall hoods | Stainless baffle 1 | Dishwasher or hot soapy water 1 | None printed |
| 3 Series RVCH chimney hoods | Mesh, with charcoal on recirculating models 2 | Dishwasher or hot soapy water; charcoal replaced 2 | Display, canceled with a 5-second key hold 2 |
| RVL ceiling hood MVCEH | Metal grease filter 3 | By hand or dishwasher 3 | Green LED after 20 cooking hours 3 |
How do I clean a baffle filter on a professional wall hood?#
Unplug the hood, then slide the filter forward off the rear lip, lower the rear and slide the front out. Wash it in the dishwasher, or at the sink in hot soapy water. Caustic detergent is not allowed, and the filter must stay in one piece. 1
The guide explains why baffles are favored: grease collects on the stainless U-shaped channels and drips down into the bottom of the filter, and the hood moves more air through a baffle than through a mesh that is usually dirty. 1 It asks that the filters be examined from time to time so all surfaces stay clean. Taking one apart is described as unnecessary and voids the filter warranty. 1

On 18-inch-high hoods there is a grease trough as well. The guide says to remove it whenever you clean the filters and to soak it in a sink with hot soapy water. Spacers are held by screws at the top and bottom of each one; remove the screws and slide the spacer out the same way as a filter. 1
What is different on a 3 Series chimney hood?#
It has mesh filters, and the guide cleans them the same way: dishwasher or hot soapy water, no caustic detergent, never taken apart. The extra step is the display: after the filters are back in the hood, hold the scroll up (+) and scroll down (-) buttons for 5 seconds. 2
To refit a mesh filter, slide its front over the front lip, push the rear up, and slide it back over the rear lip. 2 The hood's bulbs are replaced with an oven mitt on, because a bulb can break as you remove it; the guide names a 120 volt, 50 watt halogen or a 4 watt LED. 2
The guide asks you to unplug the power cord from the control panel before cleaning or servicing, and it adds that the hood is for general ventilating use only, never for hazardous or explosive vapors. 2
When should the charcoal filter be replaced?#
Replace a charcoal filter every 6 months to 1 year, depending on how much and what kind of cooking you do. Recirculating hoods only. Never put the charcoal filter in the dishwasher. 12
To replace it, remove the baffle and charcoal filter assembly and slide the charcoal filter out of its channel, then slide in a new one. 12 The professional hood guide points to a Viking dealer or the online store for replacements, and the chimney guide to a local dealer. 12 A hood that vents outdoors has no charcoal filter, so this step is not for it.

What does the green light on the ceiling hood mean?#
On the RVL Pureline Pro ceiling hood the display has white speed lights and one green light. After 20 cooking hours the green LED comes on to say the grease filter needs cleaning. 3
The guide recommends cleaning the grease filter about once a month, and warns that running the hood without grease filters risks fire from excessive contamination. 3 The remote control is part of the display: it switches the extraction on and off, sets four speeds, and runs a 10-minute run-on if you press the power button once. The fan switches itself off after 3 hours of no changes. 3
How do I clean the ceiling hood grease filter?#
Lower the bottom panel by taking hold of both sides and pulling down together, then pull the filter handle down to remove it. The guide prefers hand washing: soak 15 to 20 minutes in hot water with mild detergent or baking soda, scrub gently and rinse. 3
A dishwasher is allowed: standard dishwasher detergent, not together with other dishes if the filter is saturated with grease, a low-temperature program of at most 149°F, and let it drain afterward. The filter may discolor from the salt content, which does not affect how it works. 3
- 1
- 2
- 3
- 4
- 5
- 6
Why might the ceiling hood motor stop on its own?#
There is a thermal switch in the motor. It cuts the motor if it overheats and lets it run again after it cools. The guide says the cause of the overheating must be found, for example a pan fire, a blocked impeller or an object in the exhaust opening. 3
If the motor trips and you cannot see a cause such as a blocked opening, treat it as a service matter.
How do I keep the outside of the hood clean?#
Wipe the canopy with a cloth dipped in warm soapy water. Do not use abrasive cleansers, steel wool or cleaners that contain chlorides, which can harm stainless steel. Give it a more thorough clean every 3 months. 12
On stainless steel, use a good stainless steel cleaner and polish; on painted surfaces, a wax cleaner. If you must scrape encrusted material, soak the area with hot towels first and use a wooden or nylon scraper, never metal. 12 Enamel can be renewed with an enamel, refrigerator or automotive polish if it yellows from grease. 12
What helps a technician check a weak hood?#
Name the hood and model, the last filter cleaning or replacement, whether the reminder came back after the reset, and how the fan or lights behave. For a recirculating hood, say when the charcoal filter was last changed.
- Does the fan struggle on every speed?
- Does the reminder return right after the reset?
- Did the motor stop and restart after a rest?
- Are all bulbs out, or only one?
The hoods we work on are named on our hood service page. The baffle filters, charcoal filters and grease filter indicator entries describe each part.
Sources#
- Use & Care / Professional Indoor & Outdoor Hoods / VWH53012 / VWH53612 / VWH53048 / VWH53648 / VWH54248Viking Range, LLC (official manual PDF) · form F21286 EN (from the file name) · PDF p.6 (cleaning baffle filters), p.7 (charcoal filter, canopy cleaning)
- Use & Care / 3 Series / Chimney Wall Hoods / RVCH330 / RVCH336Viking Range, LLC (official manual PDF) · no edition code in the cached text · PDF p.6 (mesh filters, charcoal filter), p.7 (canopy cleaning, bulbs)
- User Guide / RVL - 36" or 48" Pureline Pro Ceiling Hood / MVCEH636BK MVCEH648BKViking Range, LLC (official manual PDF) · no edition code in the cached text · PDF p.6 (display LEDs), p.7 (thermal switch), p.12-14 (grease filter, cleaning, reset)




