What it means
FA on a Viking Designer cooktop is a key error, listed in the same row as FC. The control stops all heating elements and shows FA on the timer display. The manual lists no reset.
Viking cooktop FA / Control code
FA on a Viking Designer cooktop is a key error, listed in the same row as FC. The control stops all heating elements and shows FA on the timer display. The manual lists no reset.
Also shown as FA
FA on a Viking Designer cooktop is a key error, listed in the same row as FC. The control stops all heating elements and shows FA on the timer display. The manual lists no reset.
Keys are locked automatically at start-up.
FA appears on the timer display.
Your Viking checklist, kept on this device only

Keys are locked automatically at start-up. Hold LOCK for 2 seconds and see if the keys answer; that is a lock, not an error.

Make sure the touch area is clean and dry before judging the keys.

Capital F and capital A, as printed.

If FA is on the timer display, the control has detected a key error and needs a technician.
Pass along the model and the checks you ran, then open a visit request from this spot.
Book a visitA simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Component reference
Viking Designer electric cooktops run on touch controls.
Read the definitionThe manual lists FA, FC, FJ and FU under that name, as part of the electronics check of keyboard function.
Read the supporting manualThe manual gives all three the same name and no separate meaning.
Read the supporting manualNo. Fb is a keyboard error. Letter case matters in these codes.
Read the supporting manualManufacturer document
Viking Range, LLC (official manual PDF)
form F20699 EN (091509J) / PDF p.16
Source: the Viking Designer built-in electric cooktop use and care manual, Error Codes table on p. 16.
The control stops all heating elements when it detects any error.
No; a lock is not reported as an F code.
No.
The exact letters, since Fa, FA and Fc mean different things.
Viking codes, symptoms, parts, visits
FC, with a capital C, is a key error on a Viking Designer cooktop, listed in the same row as FA. All heating elements stop and FC shows on the timer display. The manual lists no reset.
Viking’s guides split a dark burner by what the igniter does. Silence means the igniter has no electricity. Clicking without a flame means gas is not arriving. Work out which one you have, try the matching steps below, and call a technician when the burner never catches.
Viking Designer electric cooktops run on touch controls. A control panel that finds an electronics problem stops all heating elements and shows F plus a second letter on the timer display. The F20699 table lists 14 of them, from key and keyboard errors to temperature sensor and relay errors. On the 6 Series induction cooktops you must hold a touch for a few seconds.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.