What it means
FJ on a Viking Designer cooktop is a key error, named the same way as FA, FC and FU. All heating elements stop and FJ shows on the timer display. No reset is listed.
Viking cooktop FJ / Control code
FJ on a Viking Designer cooktop is a key error, named the same way as FA, FC and FU. All heating elements stop and FJ shows on the timer display. No reset is listed.
Also shown as FJ
FJ on a Viking Designer cooktop is a key error, named the same way as FA, FC and FU. All heating elements stop and FJ shows on the timer display. No reset is listed.
Hold LOCK for 2 seconds to rule out a lock.
FJ appears on the timer display.
Your Viking checklist, kept on this device only

Hold LOCK for 2 seconds to rule out a lock.

Wipe the glass.

Capital F, capital J.

A key error needs a technician.
Pass along the model and the checks you ran, then open a visit request from this spot.
Book a visitA simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Component reference
Viking Designer electric cooktops run on touch controls.
Read the definitionA key error. The manual does not say which key. FA, FC and FU carry the same name.
Read the supporting manualAfter FH (control error) and before FO (software error), as a single row.
Read the supporting manualHold the LOCK key if the keys are locked, then touch and hold the ON/OFF key for two seconds to select the zone. The "hi" LED flashes, the level must be set within 10 seconds and the preset is level 6.
Read the supporting manualNo. Keyboard errors are Fb and FL.
Read the supporting manualManufacturer document
Viking Range, LLC (official manual PDF)
form F20699 EN (091509J) / PDF pp.12–16
Source: the Viking Designer built-in electric cooktop use and care manual, Error Codes table on p. 16.
No. The lock locks all keys except ON/OFF and releases with a two-second hold of LOCK.
The control stops all the heating elements when it declares an error.
The manual lists FA, FC, FJ and FU as key errors and gives no distinction.
No.
Viking codes, symptoms, parts, visits
FA on a Viking Designer cooktop is a key error, listed in the same row as FC. The control stops all heating elements and shows FA on the timer display. The manual lists no reset.
Viking’s guides split a dark burner by what the igniter does. Silence means the igniter has no electricity. Clicking without a flame means gas is not arriving. Work out which one you have, try the matching steps below, and call a technician when the burner never catches.
Viking Designer electric cooktops run on touch controls. A control panel that finds an electronics problem stops all heating elements and shows F plus a second letter on the timer display. The F20699 table lists 14 of them, from key and keyboard errors to temperature sensor and relay errors. On the 6 Series induction cooktops you must hold a touch for a few seconds.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.