What it means
FC, with a capital C, is a key error on a Viking Designer cooktop, listed in the same row as FA. All heating elements stop and FC shows on the timer display. The manual lists no reset.
Viking cooktop FC / Control code
FC, with a capital C, is a key error on a Viking Designer cooktop, listed in the same row as FA. All heating elements stop and FC shows on the timer display. The manual lists no reset.
Also shown as FC
FC, with a capital C, is a key error on a Viking Designer cooktop, listed in the same row as FA. All heating elements stop and FC shows on the timer display. The manual lists no reset.
Lowercase c is over temperature and has a different cure.
FC appears on the timer display.
Your Viking checklist, kept on this device only

Lowercase c is over temperature and has a different cure.

Hold LOCK for 2 seconds to see if the keys answer.

Dry any film from the glass.

A key error needs a technician.
Pass along the model and the checks you ran, then open a visit request from this spot.
Book a visitA simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Component reference
Viking Designer electric cooktops run on touch controls.
Read the definitionViking prints Fc (over temperature) and FC (key error) as two different codes. A capital C is the key error and shares its table row with FA.
Read the supporting manualIt mainly checks the electronics: keyboard functionality, ambient light conditions, communication between the two boards and the working temperature of the control. As soon as it detects an error, it stops all the heating elements and shows F and a second letter on the timer display.
Read the supporting manualThe "-" key lowers the power level, "+" raises it and ON/OFF selects or cancels a zone. A zone needs a two-second hold on its ON/OFF key, and the level must be set within 10 seconds or the element stays off.
Read the supporting manualThe lock key locks all keys except ON/OFF, and the control locks itself after one minute of no use. A locked keyboard is a normal state; the manual lists lockout mode as a cause for a cooktop that will not function.
Read the supporting manualManufacturer document
Viking Range, LLC (official manual PDF)
form F20699 EN (091509J) / PDF pp.12–16
Source: the Viking Designer built-in electric cooktop use and care manual, Error Codes table on p. 16.
By the second letter's case. FC is printed with a capital C and means key error; Fc has a lowercase c and means over temperature.
No. The lock indicator is a normal state, and the troubleshooting table tells you to unlock the cooktop.
The table says only key error. It does not name a key.
The manual lists them together as one key error.
Viking codes, symptoms, parts, visits
FA on a Viking Designer cooktop is a key error, listed in the same row as FC. The control stops all heating elements and shows FA on the timer display. The manual lists no reset.
Viking’s guides split a dark burner by what the igniter does. Silence means the igniter has no electricity. Clicking without a flame means gas is not arriving. Work out which one you have, try the matching steps below, and call a technician when the burner never catches.
Viking Designer electric cooktops run on touch controls. A control panel that finds an electronics problem stops all heating elements and shows F plus a second letter on the timer display. The F20699 table lists 14 of them, from key and keyboard errors to temperature sensor and relay errors. On the 6 Series induction cooktops you must hold a touch for a few seconds.
Book a diagnostic for your series at the appliance itself.
Office particulars and the entry details to give us.