Inside the appliance
Hot surface igniter on side burners. In plain English.
The 5 Series gas side burners and power burner light with a hot surface ignition system. Viking’s guide says to push and hold the control knob for 5-7 seconds so the igniter can heat up, then turn to LITE. During an installation test, the igniter should glow bright and steady.

Where it fits.
Hot surface igniter on side burners in the appliance
Beside each burner under the cooking grate of the side burner or power burner.
The photo shows the kind of component. It cannot tell you which replacement fits your series.
The signs that this system wants attention.
Hot surface igniter on side burners trouble can turn up together with a drop in performance or a code that keeps coming back. Testing is required before anyone decides this component is to blame.

Viking grill side burner won’t light
A Viking 5 Series gas side or power burner lights with a hot surface igniter. Push the knob in and hold it 5 to 7 seconds before turning to LITE, and the igniter should glow bright and steady. If it does not, check the GFI outlet, the burner seating and the wind, then book a technician.

Viking grill side burner yellow flame
According to Viking, a yellow flame on this accessory means a lack of air, although a few orange tips are normal with dusty air or heavy grease. The air shutters are adjusted only on a completely cool unit. A smell of gas while cooking means shut everything off.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can make yourself. Beware of standing water and sharp edges. Never touch a wet plug or live wiring, take off service panels, or go beyond what your series' guide allows.
- 1
Run the pre-use checklist
Smell of gas, loose burners, wind and clear surroundings all come first.
- 2
Push and hold
Hold the knob in for 5-7 seconds before moving it to LITE.
- 3
Watch the glow
The igniter should glow bright and steady.
- 4
Check the power
The electrical system can fail if a connection loosened in shipping or the GFI outlet tripped. Reset the GFI.
Cleaning or replacement?
Leave internal testing to a technician.
The igniter never glows with the GFI reset.
The burner lights and goes out.
You smell gas at any point.
Arrange a diagnosticSources and model boundaries.
The Hot surface igniter on side burners guidance rests on these references. Choose the manual that fits your own series.
- User / Install Guide / 5 Series Gas Side Burner Accessories / VQGSB5131 | VQGPB5201
Rely on the guide for your precise series, and read how we research these pages.
How do I light a Viking side burner?
Make sure knobs are off, push and hold one for 5-7 seconds so the igniter heats, turn to LITE, then set the flame.
The igniter does not glow. Why?
The guide says a connection may have loosened or the GFI outlet may have tripped, requiring a reset.
What if I smell gas?
Turn off all burners and the main fuel supply, then perform a leak test with soapy water, outdoors only. If unsure, leave and call your gas company.
Does this cover the whole grill?
No. This page covers the side burner accessories guide only.
Viking codes, symptoms, parts, visits
From the message to your next move.
Viking grill side burner won’t light
A Viking 5 Series gas side or power burner lights with a hot surface igniter. Push the knob in and hold it 5 to 7 seconds before turning to LITE, and the igniter should glow bright and steady. If it does not, check the GFI outlet, the burner seating and the wind, then book a technician.
Grill repair
Book a diagnostic for your series at the appliance itself.
Find your metro
Office particulars and the entry details to give us.

