Read the whole display
Give the series and the exact label on the display. SAB and SHOW are modes you switched on, not errors.
Model-specific code library
We decode HIGH TEMP, DOOR OPEN, POWER, SAB, SHOW and Shr for built-in freezers, read from the same two manuals as the refrigerators.
DOOR OPEN on a Viking built-in freezer means a door or drawer stayed open for more than three minutes and the alarm sounds. Close what is open; on a 5 Series, ALARM OFF also silences it.
Read the DOOR OPEN checks6 researched freezer codes. What a message means shifts from one Viking series to the next, so your own manual settles it.
DOOR OPEN on a Viking built-in freezer means a door or drawer stayed open for more than three minutes and the alarm sounds. Close what is open; on a 5 Series, ALARM OFF also silences it.
Close the doorHIGH TEMP on a Viking built-in freezer is the high temperature alarm. A 5 Series lights HIGH TEMP and sounds after the freezer has been too warm for two hours; a 7 Series sounds and flashes its display. Silence it, then check the contents.
Alarm, check foodPOWER on a Viking built-in freezer shows that power was lost. A 5 Series flashes the POWER indicator without a sound and ALARM OFF clears it; a 7 Series shows a power loss on its display after a long outage and any key clears it.
Clear and checkSAB on a Viking built-in freezer is Sabbath mode, a setting and not an error. It disables the interior lights and the alarms. A 5 Series beeps three times and lights the code; a 7 Series lights its the code button blue.
Mode, not an errorSHOW on a Viking built-in freezer is showroom mode: the controls and interior lights work apart from the cooling system, so the freezer will not freeze. On a 5 Series three beeps sound and SHOW lights.
Mode, not an errorShr, or oPn, on a Viking 5 Series built-in freezer is the temperature sensor alarm. The alarm sounds and the display shows oPn or Shr. Press ALARM OFF. If the display does not return to showing the temperature, book a visit.
Alarm, then book
We decode HIGH TEMP, DOOR OPEN, POWER, SAB, SHOW and Shr for built-in freezers, read from the same two manuals as the refrigerators.
The VEIL freezer messages are listed with the refrigerator rows, because that guide names Upper unit and Lower unit rather than a freezer. No numeric freezer code is printed in the documents we read.
Give the series and the exact label on the display. SAB and SHOW are modes you switched on, not errors.
Check frozen food before refreezing anything that has softened. Switch the main power off before you open any panel.
A Viking all-freezer that runs warm is often a setting or usage issue before it is a repair: a cabinet that has not settled, doors held open, a heavy load of warm food, demo mode, or a condenser needing a clean. Rule those out, then book a technician.
On a Viking all-freezer or bottom-mount unit, the guides list four reasons for little or no ice: the ice maker switched off, no water at the valve, a freezer not yet cold, or a filter limiting flow. Take them in that order, and call us if the tray stays empty.
Rely on the guide for your precise series, and read how we research these pages.
The VEIL freezer messages are listed with the refrigerator rows, because that guide names Upper unit and Lower unit rather than a freezer. No numeric freezer code is printed in the documents we read.
Snap the whole freezer display and the data plate. Note what the appliance was doing the moment the message came up, and do not borrow an explanation meant for some other product.
A phrase people once searched for is no substitute for the maker's own wording. When our freezer documents leave a message undecoded, it stays listed by name and we point you to help without naming any part or cause.
Open a manufacturer document from this freezer library and match the model on its cover to the plate on your appliance. A different series comes with its own guide.