Viking wine cellar LL / Temperature alert

Viking wine-cooler
error LL

Wine-cooler / display referenceLL

LL on a Viking FWUI5242G undercounter wine cellar is the low temperature notification. The manual points to its service department; with us, book a visit. Check the setting, then book a visit.

Also shown as LL

Last reviewed

Wine-cooler / display referenceLL
Meaning
LL on a Viking FWUI5242G undercounter wine cellar is the low temperature notification. The manual points to its service department; with us, book a visit. Check the setting, then book a visit.
Who handles it
Check, then book
Related codes
Source
Install / Use & Care MANUAL / Professional Undercounter Wine Cellar / FWUI5242G

What Viking wine cellar LL means.

What it means

LL on a Viking FWUI5242G undercounter wine cellar is the low temperature notification. The manual points to its service department; with us, book a visit. Check the setting, then book a visit.

What you can safely check

Confirm the temperature.

When to call a technician

LL stays on.

Your Viking checklist, kept on this device only

Safe checks, in order.

0 of 4 checks done
  1. Viking wine cellar LL: Two-zone wine cooler with its glass door open, bottles on wooden racks above and below and an orange lit display between the zones
    Illustration. Follow your model’s instructions.
    Before you begin

    Check the setting

    Confirm the temperature.

  2. Heavy metal control knobs on a professional-style range
    Illustration. Follow your model’s instructions.
    Check 2

    Check the bottles

    Near the vents, liquids can freeze.

  3. A technician holds a tablet showing a blank checklist beside a stainless gas range with a skillet on a lit burner.
    Illustration. Follow your model’s instructions.
    Check 3

    Allow time

    The unit moves toward set point.

  4. A technician testing a range burner with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Book a visit

    If LL stays on, book a visit.

Still showing LL?

Pass along the model and the checks you ran, then open a visit request from this spot.

Book a visit

Cooling and defrost.

Conceptual Refrigerator sectionEvaporatorEvaporator fanControl123
  1. 2Evaporator fan
  2. 3Control

A simplified sketch, because the inside of a Viking differs by series. Tap a highlighted part for its photo and the matching test.

Parts behind the message.

An undercounter wine cellar shows a blue-lit upper zone and a white-lit lower zone, each with racked bottles.

Component reference

Temperature zones

A Viking dual-zone wine cellar has an upper and a lower zone, each set between 38 and 65 degrees F in the FWUI5242G guide.

Read the definition

A little more context.

What does LL mean?

LL appears when the compartment temperature stays away from the control setting for an extended time, as the low temperature notification. The manual says to contact the service department.

Read the supporting manual

What does the table say for a cellar that is too cold?

Control set too cold, or a door gasket that is not sealing. Remedies are to adjust warmer and allow 24 hours, and to check door alignment or replace the gasket.

Read the supporting manual

Do the two zones constrain each other?

Yes. The lower zone setting cannot be colder than the upper zone, and the lower cannot be more than 20 degrees above the upper. Both range from 38 F to 65 F.

Read the supporting manual

The manual behind the message.

Manufacturer document

Install / Use & Care MANUAL / Professional Undercounter Wine Cellar / FWUI5242G

Viking Range, LLC (official manual PDF)

no edition code in the cached text / PDF p.16

Source: the Viking FWUI5242G professional undercounter wine cellar manual, which prints HH and LL alerts.

Here to help

Good questions.
Clear answers.

Talk to our team
Can I set the lower zone colder than the upper?

No. The manual says the set temperature of the lower zone can't be colder than the upper zone.

What temperatures can I set?

38 F to 65 F for each zone.

Does the light color mean anything?

Blue shows the upper zone being set and white the lower zone.

How long after a change?

The manual says allow 24 hours for temperature to stabilize.

Let’s take care of it.

The burner will not light.
Let us take a look.