Model-specific code library

Viking refrigerator error codes.

We decode CL on 7 Series integrated models, Shr on 5 Series built-ins, five alarm and mode labels shared by the 5 and 7 Series, and eleven written messages of the VEIL touch-display line, each tied to the series that prints it.

Refrigerator code finder

Shr, or oPn, on a Viking 5 Series built-in refrigerator is the temperature sensor alarm. The unit sounds and the display shows oPn or Shr. Press Alarm Off to silence it. If the display does not go back to the temperature, book a visit.

Read the Shr checks
Or choose

21 researched refrigerator codes. What a message means shifts from one Viking series to the next, so your own manual settles it.

Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Messages with a manual behind them.

Check condenser

Maintenance reminder

Check condenser, shown as CHECK COND., appears every 6 months on a Viking VEIL integrated refrigerator. Clean the condenser, then press and hold ENTER for 5 seconds to reset it. It is a reminder, not a failure message.

Routine upkeep
CL

Maintenance reminder

CL blinking on the temperature display of a Viking 7 Series integrated refrigerator is a cleaning reminder for the condenser coil. Clean the coil, then press the up and down arrows together for 3 seconds to clear it.

Routine upkeep
Clean Condenser

Maintenance reminder

Clean Condenser on a Viking VEIL integrated refrigerator is a recurring reminder, shown with a sound and a display signal. Clean the condenser, then reset the warning on the display. Viking prints 12 months in one place and 6 months in another.

Routine upkeep
Door alert

Door alarm

Door alert on a Viking outdoor refrigerator or drawer sounds after the door has been open for more than 30 minutes: a tone every minute and a symbol on the display. Close the door to silence the alert and reset it.

Close the door
DOOR OPEN

Door alarm

DOOR OPEN on a Viking refrigerator means a door or drawer has been left open for more than three minutes, so the alarm sounds. Close the door that is open and the alarm stops; on a 5 Series you can also press ALARM OFF.

Close the door
Error Code...

General message

Error Code... on a Viking VEIL integrated refrigerator is the catch-all message for a functional problem. The guide asks you to check the conditions of use, such as large food loads and frequent door opening, and to press ALARM to silence it.

Book a visit
HH

Temperature alert

HH on a Viking outdoor refrigerator or drawer means the compartment has been above its setting for an extended time. The manual points to its service department; with us, book a visit. Check the door and the load, then book a visit.

Check, then book
HIGH TEMP

Temperature alarm

HIGH TEMP means the temperature in a Viking refrigerator has stayed too high. On a 5 Series the alarm sounds and the HIGH TEMP light glows after two hours; a 7 Series sounds the alarm and flashes the display. Press the alarm key, then check the food.

Alarm, check food
LL

Temperature alert

LL on a Viking outdoor refrigerator or drawer is the low temperature notification. The manual points to its service department; with us, book a visit. Check the setpoint, then book a visit.

Check, then book
Lower unit open

Door alarm

Lower unit open on a Viking VEIL integrated model means the freezer door has been open for a few minutes. Close it firmly. If the message stays on with the freezer shut, book a visit.

Close the door
Lower unit too cold

Temperature alert

Lower unit too cold on a Viking VEIL integrated model means the freezer is too cold. Viking says to wait 12 hours. Book a visit if the message has not cleared by then.

Wait, then book
Lower unit too warm

Temperature alert

Lower unit too warm on a Viking VEIL integrated model means the freezer is too warm. The guide sends you to its Troubleshooting Guide and prints no cause. Check the door, check the food, and book a visit if the warm reading stays.

Check food
Power Failure!!

Power loss

Power Failure!! on a Viking VEIL refrigerator reports an extended interruption of electrical power. The unit starts again by itself and shows the highest temperatures recorded. Press ALARM to silence the sound, then check the food.

Alarm, check food
POWER

Power loss

POWER on a Viking refrigerator tells you the unit lost power for a while. On a 5 Series the POWER indicator flashes with no sound; press ALARM OFF to clear it. A 7 Series shows a power loss on the temperature display; press any key.

Clear and check
Replace filter

Maintenance reminder

Replace filter on a Viking VEIL integrated refrigerator asks you to replace the water filter cartridge. The message appears every 12 months after the last reset. Fit a new cartridge and reset the reminder.

Routine upkeep
SAB

Mode

SAB on a Viking refrigerator is Sabbath mode, a setting you switched on, not an error. It disables the interior lights and alarms. A 5 Series beeps three times and lights SAB; a 7 Series lights its SAB button blue.

Mode, not an error
SHOW

Mode

SHOW on a Viking refrigerator is showroom mode, not an error. It lets the controls and interior lights work separately from the cooling system, so the unit does not cool. On a 5 Series three beeps sound and SHOW lights.

Mode, not an error
Shr

Sensor alarm

Shr, or oPn, on a Viking 5 Series built-in refrigerator is the temperature sensor alarm. The unit sounds and the display shows oPn or Shr. Press Alarm Off to silence it. If the display does not go back to the temperature, book a visit.

Alarm, then book
Upper unit open

Door alarm

Upper unit open on a Viking VEIL integrated refrigerator means the refrigerator door has been open for a few minutes. Close it and the message clears. If it stays with the door shut, book a visit.

Close the door
Upper unit too cold

Temperature alert

Upper unit too cold on a Viking VEIL integrated model means the refrigerator is too cold. Viking says to wait 12 hours. Book a visit if the message has not cleared by then.

Wait, then book
Upper unit too warm

Temperature alert

Upper unit too warm on a Viking VEIL integrated model means the refrigerator is too warm. The guide sends you to its Troubleshooting Guide and prints no cause. Check the door, check the food, and book a visit if the warm reading stays.

Check food

E1, E3, E4, DF and ICE are not printed in any refrigerator document we read. Current undercounter and French-door refrigerator manuals could not be downloaded, so those lines are not covered.

Start with the model boundary.

Refrigerators in a thoughtfully designed home

Viking refrigerators print alarms, reminders and two display words.

We decode CL on 7 Series integrated models, Shr on 5 Series built-ins, five alarm and mode labels shared by the 5 and 7 Series, and eleven written messages of the VEIL touch-display line, each tied to the series that prints it.

E1, E3, E4, DF and ICE are not printed in any refrigerator document we read. Current undercounter and French-door refrigerator manuals could not be downloaded, so those lines are not covered.

Choose the next safe action.

Read the whole display

Give the series (5, 7 or the VEIL touch display) and the exact word or letters on the display, including capitals.

Respect the service boundary

Should either compartment warm, relocate perishables to a cooler. Switch the main power off before you open any panel.

Documents checked for this library.

  • Use & Care MANUAL / 7 SERIES / Integrated All Refrigerator / Integrated All Freezer
  • Use & Care MANUAL / 5 SERIES / Built-in All Refrigerators and All Freezers
  • User Guide / All Refrigerator / All Freezer / Bottom Mount
  • Install / Use & Care MANUAL / Professional Undercounter Ice Machine / FIUI5152D

Rely on the guide for your precise series, and read how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Are these refrigerator meanings universal?

E1, E3, E4, DF and ICE are not printed in any refrigerator document we read. Current undercounter and French-door refrigerator manuals could not be downloaded, so those lines are not covered.

What do I include when I report a refrigerator code?

Snap the whole refrigerator display and the data plate. Note what the appliance was doing the moment the message came up, and do not borrow an explanation meant for some other product.

Why does a refrigerator message show up with no explanation?

A phrase people once searched for is no substitute for the maker's own wording. When our refrigerator documents leave a message undecoded, it stays listed by name and we point you to help without naming any part or cause.

How can I tell which refrigerator series a document covers?

Open a manufacturer document from this refrigerator library and match the model on its cover to the plate on your appliance. A different series comes with its own guide.

Let’s take care of it.

The burner will not light.
Let us take a look.